[Subject Prev][Subject Next][Thread Prev][Thread Next][Subject Index][Thread Index]

[vine-users:056955] i845 チップセットでのサウンド設定について


はじめまして、今井@新横浜と申します。

このたびi845Gチップセット搭載のマシンにVineLinux2.6を
インストールいたしましたが、サウンドの設定でつまづいております。

インストール後の初回起動時には
kudzuによってi845Gチップセットは検出されたもようです。
その後、sndconfigコマンドにてオンボードのサウンドチップの設定をして
ちゃんとサンプルサウンドも再生されました。
どうやらi810_audioドライバが使用されているようですが

Module                  Size  Used by    Tainted: P  
agpgart                41824   4  (autoclean)
autofs                 10916   1  (autoclean)
8139too                17056   1 
mii                     3420   0  [8139too]
uhci                   26824   0  (unused)
hid                    20384   0  (unused)
ntfs                   55296   1  (autoclean)
md                     60576   0  (unused)
encode-eucjp          242944   0  (unused)
i810_audio             24928   0 
ac97_codec             11904   0  [i810_audio]
soundcore               5508   2  [i810_audio]
rtc                     7132   0  (autoclean)

なぜかその後はまったく音が鳴りません。(ビープ音は出ます)

インターネットで情報を探してみましたが
こちらにあるとおり、ミキサーの設定を変えてもダメでした。
http://linux.compaq.co.jp/support/doc/evo_w4000/evo_w4000_kd20.html

また、ALSAがもしかしたら使えるかも、的な情報も得ることができましたが
具体的な内容はわからずじまいでした。
http://lists.debian.or.jp/debian-users/200209/msg00173.html

この件について何か情報をお持ちの方がいらっしゃいましたら
教えていただけると幸いです。

ちなみにカーネルは2.4.19-0vl26を使用しております。
以下に現在のdmesgとlspciの出力を載せておきます。
長くなってしまって申し訳ありませんが、宜しくお願いします。

Linux version 2.4.19-0vl26 (root _at_ neo.vinelinux.com) (gcc version 2.95.3 20010315 (release)) #1 2002年11月23日土曜日 09:48:34 JST
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003f7fa000 (usable)
 BIOS-e820: 000000003f7fa000 - 000000003f7fd000 (ACPI data)
 BIOS-e820: 000000003f7fd000 - 000000003f7fe000 (ACPI NVS)
 BIOS-e820: 000000003f7fe000 - 000000003f800000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
user-defined physical RAM map:
 user: 0000000000000000 - 000000000009fc00 (usable)
 user: 000000000009fc00 - 00000000000a0000 (reserved)
 user: 00000000000f0000 - 0000000000100000 (reserved)
 user: 0000000000100000 - 000000003f7fa000 (usable)
119MB HIGHMEM available.
896MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 260090
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 30714 pages.
ACPI: RSDP (v000 ASUS                       ) @ 0x000f56e0
ACPI: RSDT (v001 ASUS   P4BGL-ED 16944.11825) @ 0x3f7fa000
ACPI: FADT (v001 ASUS   P4BGL-ED 16944.11825) @ 0x3f7fa0b2
ACPI: BOOT (v001 ASUS   P4BGL-ED 16944.11825) @ 0x3f7fa030
ACPI: MADT (v001 ASUS   P4BGL-ED 16944.11825) @ 0x3f7fa058
ACPI: DSDT (v001   ASUS P4BGL-ED 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium 4(tm) XEON(tm) APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x1])
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x16] polarity[0x3] trigger[0x3])
Using ACPI (MADT) for SMP configuration information
Kernel command line: ro root=/dev/hda2 vga=0x301 mem=1040360K
Initializing CPU#0
Detected 2600.118 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 5190.45 BogoMIPS
Memory: 1025076k/1040360k available (1498k kernel code, 14896k reserved, 683k data, 124k init, 122856k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU:     After generic, caps: bfebfbff 00000000 00000000 00000000
CPU:             Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 17.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00178020
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0020
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  0    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  0    0    0   0   0    1    1    71
 0a 001 01  0    0    0   0   0    1    1    79
 0b 001 01  0    0    0   0   0    1    1    81
 0c 001 01  0    0    0   0   0    1    1    89
 0d 001 01  0    0    0   0   0    1    1    91
 0e 001 01  0    0    0   0   0    1    1    99
 0f 001 01  0    0    0   0   0    1    1    A1
 10 000 00  1    0    0   0   0    0    0    00
 11 000 00  1    0    0   0   0    0    0    00
 12 000 00  1    0    0   0   0    0    0    00
 13 000 00  1    0    0   0   0    0    0    00
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 001 01  1    1    0   1   0    1    1    71
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9-> 0:22
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2600.0172 MHz.
..... host bus clock speed is 100.0004 MHz.
cpu: 0, clocks: 1000004, slice: 500002
CPU0<T0:1000000,T1:499984,D:14,S:500002,C:1000004>
mtrr: v1.40 (20010327) Richard Gooch (rgooch _at_ atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20021115
PCI: PCI BIOS revision 2.10 entry at 0xf21a0, last bus=1
PCI: Using configuration type 1
IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9)
    ACPI-0508: *** Info: GPE Block0 defined as GPE0 to GPE31
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16)
00:00:1d[A] -> 2-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xb1 -> IRQ 19)
00:00:1d[B] -> 2-19 -> IRQ 19
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb9 -> IRQ 18)
00:00:1d[C] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xc1 -> IRQ 23)
00:00:1d[D] -> 2-23 -> IRQ 23
Pin 2-18 already programmed
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xc9 -> IRQ 17)
00:00:1f[B] -> 2-17 -> IRQ 17
Pin 2-16 already programmed
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21)
00:01:09[A] -> 2-21 -> IRQ 21
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xd9 -> IRQ 22)
00:01:09[B] -> 2-22 -> IRQ 22
Pin 2-23 already programmed
IOAPIC[0]: Set PCI routing entry (2-20 -> 0xe1 -> IRQ 20)
00:01:09[D] -> 2-20 -> IRQ 20
Pin 2-22 already programmed
Pin 2-23 already programmed
Pin 2-20 already programmed
Pin 2-21 already programmed
Pin 2-23 already programmed
Pin 2-22 already programmed
Pin 2-21 already programmed
Pin 2-22 already programmed
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: overridden by ACPI.
Starting kswapd
allocated 64 pages and 64 bhs reserved for the highmem bounces
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
vesafb: framebuffer at 0xf0000000, mapped to 0xf881a000, size 8000k
vesafb: mode is 640x480x8, linelength=640, pages=25
vesafb: protected mode interface info at a5f3:1f5f
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller on PCI bus 00 dev f9
PCI: Device 00:1f.1 not available because of resource collisions
ICH4: BIOS setup was incomplete.
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hda: IC35L080AVVA07-0, ATA DISK drive
hdc: PLEXTOR CD-R PX-320A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c037a5e4, I/O limit 4095Mb (mask 0xffffffff)
hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=10011/255/63, UDMA(100)
hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.99.newide
Partition check:
 hda: hda1 hda2 hda3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
bond0 registered without MII link monitoring, in bonding mode.
Equalizer1996: $Revision: 1.2.1 $ $Date: 1996/09/22 13:52:00 $ Simon Janes (simon _at_ ncm.com)
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
ide-floppy driver 0.99.newide
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 124k freed
Real Time Clock Driver v1.10e
Adding Swap: 1052248k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Intel 810 + AC97 Audio, version 0.24, 09:57:33 Nov 23 2002
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH4 found at IO 0xa400 and 0xa800, MEM 0xee000000 and 0xed800000, IRQ 17
i810: Intel ICH4 mmio at 0xf8806000 and 0xf907f000
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Audio codec, id: ALG16 (ALC200/200P)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NTFS driver v1.1.22 [Flags: R/W MODULE]
NTFS: Warning! NTFS volume version is Win2k+: Mounting read-only
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech _at_ suse.cz>
hid-core.c: USB HID support drivers
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Setting latency timer of device 00:1d.0 to 64
uhci.c: USB UHCI at I/O 0xd800, IRQ 16
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
uhci.c: USB UHCI at I/O 0xd400, IRQ 19
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
uhci.c: USB UHCI at I/O 0xd000, IRQ 18
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 Fast Ethernet at 0xb800, 00:e0:18:bc:46:7a, IRQ 23
eth0:  Identified 8139 chip type 'RTL-8139C'
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest }
hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
hda: CHECK for good STATUS
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 933M
agpgart: Detected an Intel 845G Chipset.
agpgart: detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
memory : f767f6a0
memory : f767f6e0


00:00.0 Host bridge: Intel Corporation: Unknown device 2560 (rev 01)
00:02.0 VGA compatible controller: Intel Corporation: Unknown device 2562 (rev 01)
00:1d.0 USB Controller: Intel Corporation: Unknown device 24c2 (rev 01)
00:1d.1 USB Controller: Intel Corporation: Unknown device 24c4 (rev 01)
00:1d.2 USB Controller: Intel Corporation: Unknown device 24c7 (rev 01)
00:1d.7 USB Controller: Intel Corporation: Unknown device 24cd (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82820 820 (Camino 2) Chipset PCI (rev 81)
00:1f.0 ISA bridge: Intel Corporation: Unknown device 24c0 (rev 01)
00:1f.1 IDE interface: Intel Corporation: Unknown device 24cb (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation: Unknown device 24c5 (rev 01)
01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)


-- 
Naoto Imai <imai_ml _at_ tmtv.ne.jp>

この情報があなたの探していたものかどうか選択してください。
yes/まさにこれだ!   no/違うなぁ   part/一部見つかった   try/これで試してみる

あなたが探していた情報はどのようなことか、ご自由に記入下さい。特に「まさにこれだ!」と言う場合は記入をお願いします。
例:「複数のマシンからCATV経由でipmasqueradeを利用してWebを参照したい場合の設定について」
Follow-Ups: